Official ICT switch settings
XBA-42X DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWZ442X0100-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reserved | ON | — | — | — | — | — | — | — |
| Reservedfactory default | OFF | — | — | — | — | — | — | — |
| Reserved | — | ON | — | — | — | — | — | — |
| Reservedfactory default | — | OFF | — | — | — | — | — | — |
| Reserved | — | — | ON | — | — | — | — | — |
| Reservedfactory default | — | — | OFF | — | — | — | — | — |
| Reserved | — | — | — | ON | — | — | — | — |
| Reservedfactory default | — | — | — | OFF | — | — | — | — |
| Reserved | — | — | — | — | ON | — | — | — |
| Reservedfactory default | — | — | — | — | OFF | — | — | — |
| Disable Bill Reject 4 Times BA Stop By 30 Sec | — | — | — | — | — | ON | — | — |
| Enable Bill Reject 4 Times BA Stop By 30 Secfactory default | — | — | — | — | — | OFF | — | — |
| Stack Banknote when Power-up | — | — | — | — | — | — | ON | — |
| Reject Banknote when Power-upfactory default | — | — | — | — | — | — | OFF | — |
| Reserved | — | — | — | — | — | — | — | ON |
| Reservedfactory default | — | — | — | — | — | — | — | OFF |
- This dip switch is located at the side of XBA.
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reserved | ON | — | — | — | — | — | — | — |
| Reservedfactory default | OFF | — | — | — | — | — | — | — |
| Reserved | — | ON | — | — | — | — | — | — |
| Reservedfactory default | — | OFF | — | — | — | — | — | — |
| Reserved | — | — | ON | — | — | — | — | — |
| Reservedfactory default | — | — | OFF | — | — | — | — | — |
| Reserved | — | — | — | ON | — | — | — | — |
| Reservedfactory default | — | — | — | OFF | — | — | — | — |
| Reserved | — | — | — | — | ON | — | — | — |
| Reservedfactory default | — | — | — | — | OFF | — | — | — |
| Reserved | — | — | — | — | — | ON | — | — |
| Reservedfactory default | — | — | — | — | — | OFF | — | — |
| Reserved | — | — | — | — | — | — | ON | — |
| Reservedfactory default | — | — | — | — | — | — | OFF | — |
| Reserved | — | — | — | — | — | — | — | ON |
| Reservedfactory default | — | — | — | — | — | — | — | OFF |
- This dip switch is located on the CPU board; remove the CPU board cover first.
| Bill value | ICT108U |
|---|---|
| BV1 | CNY 1 |
| BV2 | CNY 5 |
| BV3 | CNY 10 |
| BV4 | CNY 20 |
| BV5 | CNY 50 |
| BV6 | CNY 100 |
| BV7 | LAK 500 |
| BV8 | LAK 1000 |
| BV9 | LAK 2000 |
| BV10 | LAK 5000 |
| BV11 | LAK 10000 |
| BV12 | LAK 20000 |
| BV13 | LAK 50000 |
| BV14 | LAK 100000 |
| BV15 | THB 20 |
| BV16 | THB 50 |
| BV17 | THB 100 |
| BV18 | THB 500 |
| BV19 | USD 1 |
| BV20 | USD 5 |
| BV21 | USD 10 |
| BV22 | USD 20 |
| BV23 | USD 50 |
| BV24 | USD 100 |
Before you power up
- Calibration card is needed.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.