Official ICT switch settings
V7E/LX7-XCD6 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWR6XC60100-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 |
|---|---|---|---|---|---|---|---|---|
| Reject XCD 5 & USD 1 | ON | — | — | — | — | — | — | — |
| Accept XCD 5 & USD 1factory default | OFF | — | — | — | — | — | — | — |
| Reject XCD 10 & USD 5 | — | ON | — | — | — | — | — | — |
| Accept XCD 10 & USD 5factory default | — | OFF | — | — | — | — | — | — |
| Reject XCD 20 & USD 10 | — | — | ON | — | — | — | — | — |
| Accept XCD 20 & USD 10factory default | — | — | OFF | — | — | — | — | — |
| Reserved | — | — | — | ON | — | — | — | — |
| Reservedfactory default | — | — | — | OFF | — | — | — | — |
| Reserved | — | — | — | — | ON | — | — | — |
| Reservedfactory default | — | — | — | — | OFF | — | — | — |
| Reserved | — | — | — | — | — | ON | — | — |
| Reservedfactory default | — | — | — | — | — | OFF | — | — |
| Pulse Mode / Other Mode | — | — | — | — | — | — | — | — |
| Harness Disable — BA stopped working when fishing | — | — | — | — | — | — | ON | — |
| Harness Enable — Normalfactory default | — | — | — | — | — | — | OFF | — |
| Inhibit Active High | — | — | — | — | — | — | — | ON |
| Inhibit Active Lowfactory default | — | — | — | — | — | — | — | OFF |
- Dip Switch 1 to 5 are only for Pulse mode.
- Pulse working with $1 USD = $2 XCD.
- MDB working with $1 USD = $2.5 XCD.
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| 1 pulse / XCD 1factory default | OFF | OFF | — | — |
| 5 pulses / XCD 1 | ON | OFF | — | — |
| 10 pulses / XCD 1 | OFF | ON | — | — |
| 25 pulses / XCD 1 | ON | ON | — | — |
| Pulse Speed: 50ms LO / 50ms HIfactory default | — | — | OFF | OFF |
| Pulse Speed: 60ms LO / 300ms HI | — | — | ON | OFF |
| Pulse Speed: 30ms LO / 50ms HI | — | — | OFF | ON |
| Pulse Speed: 150ms LO / 150ms HI | — | — | ON | ON |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Credit-Pulse Normal HIGHfactory default | ON | — | — | — |
| Credit-Pulse Normal LOW | OFF | — | — | — |
| Pulse Modefactory default | — | ON | OFF | — |
| ICT104U Interface | — | OFF | OFF | — |
| ICT104V Interface | — | OFF | ON | — |
| MDB Interface | — | ON | ON | — |
| Reserved | — | — | — | ON |
| Reservedfactory default | — | — | — | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reservedfactory default | ON | — | — | — |
| Reserved | OFF | — | — | — |
| Pulse Mode | — | ON | OFF | — |
| ICT104U Interfacefactory default | — | OFF | OFF | — |
| ICT104V Interface | — | OFF | ON | — |
| MDB Interface | — | ON | ON | — |
| Reserved | — | — | — | ON |
| Reservedfactory default | — | — | — | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reservedfactory default | ON | — | — | — |
| Reserved | OFF | — | — | — |
| Pulse Mode | — | ON | OFF | — |
| ICT104U Interface | — | OFF | OFF | — |
| ICT104V Interfacefactory default | — | OFF | ON | — |
| MDB Interface | — | ON | ON | — |
| Reserved | — | — | — | ON |
| Reservedfactory default | — | — | — | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Scaling Factor (SF) = 100; Decimal Point Position (DPP) = 2factory default | ON | — | — | — |
| Scaling Factor (SF) = 1; Decimal Point Position (DPP) = 1 | OFF | — | — | — |
| Pulse Mode | — | ON | OFF | — |
| ICT104U Interface | — | OFF | OFF | — |
| ICT104V Interface | — | OFF | ON | — |
| MDB Interfacefactory default | — | ON | ON | — |
| Reserved | — | — | — | ON |
| Reservedfactory default | — | — | — | OFF |
| Bill value | ICT104V | ICT104U | Pulse | MDB |
|---|---|---|---|---|
| BV1 | XCD 5 | XCD 5 | XCD 5 | XCD 5 |
| BV2 | XCD 10 | XCD 10 | XCD 10 | XCD 10 |
| BV3 | XCD 20 | XCD 20 | XCD 20 | XCD 20 |
| BV4 | USD 1 | USD 1 | USD 1 | USD 1 |
| BV5 | USD 5 | USD 5 | USD 5 | USD 5 |
| BV6 | USD 10 | USD 10 | USD 10 | USD 10 |
Before you power up
- Please reset the bill acceptor after any changes on Dip switch.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.