Official ICT switch settings
S7A II-USD6 DIP switch settings
Every switch function from ICT’s own setting sheet (part number SWQ8US60400-R), transcribed into tables you can read on a phone at the machine. Rows marked factory default are how the unit ships.
| Function | SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | SW7 | SW8 | SW1-2 | SW2-2 | SW3-2 | SW4-2 |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Reject USD 1 & 5 | ON | — | — | — | — | — | — | — | — | — | — | — |
| Accept USD 1 & 5factory default | OFF | — | — | — | — | — | — | — | — | — | — | — |
| Reject USD 10 & 20 | — | ON | — | — | — | — | — | — | — | — | — | — |
| Accept USD 10 & 20factory default | — | OFF | — | — | — | — | — | — | — | — | — | — |
| Reject USD 50 & 100 | — | — | ON | — | — | — | — | — | — | — | — | — |
| Accept USD 50 & 100factory default | — | — | OFF | — | — | — | — | — | — | — | — | — |
| High Acceptance | — | — | — | ON | — | — | — | — | — | — | — | — |
| High Securityfactory default | — | — | — | OFF | — | — | — | — | — | — | — | — |
| Reserved | — | — | — | — | ON | — | — | — | — | — | — | — |
| Reservedfactory default | — | — | — | — | OFF | — | — | — | — | — | — | — |
| Disable Bill Reject 4 Times; BA Stop By 30 Sec | — | — | — | — | — | ON | — | — | — | — | — | — |
| Enable Bill Reject 4 Times; BA Stop By 30 Secfactory default | — | — | — | — | — | OFF | — | — | — | — | — | — |
| Harness Disable | — | — | — | — | — | — | ON | — | — | — | — | — |
| Harness Enablefactory default | — | — | — | — | — | — | OFF | — | — | — | — | — |
| Other Interface — Test Mode (No Communication) | — | — | — | — | — | — | — | — | ON | — | — | — |
| Other Interface — Operation Modefactory default | — | — | — | — | — | — | — | — | OFF | — | — | — |
| Pulse Mode — Inhibit Active HIGH (Test)factory default | — | — | — | — | — | — | — | — | — | ON | — | — |
| Pulse Mode — Inhibit Active LOWfactory default | — | — | — | — | — | — | — | — | — | OFF | — | — |
| ENABLE IrDA Download | — | — | — | — | — | — | — | — | — | — | ON | — |
| Reservedfactory default | — | — | — | — | — | — | — | — | — | — | OFF | — |
| ENABLE INHIBIT-Sleep Only | — | — | — | — | — | — | — | — | — | — | — | ON |
| 5 second Timeout Onlyfactory default | — | — | — | — | — | — | — | — | — | — | — | OFF |
| NORMAL | — | — | — | — | — | — | — | — | — | — | OFF | OFF |
| MODE1 | — | — | — | — | — | — | — | — | — | — | OFF | ON |
| MODE2 | — | — | — | — | — | — | — | — | — | — | ON | OFF |
| MODE1+2factory default | — | — | — | — | — | — | — | — | — | — | ON | ON |
- The second switch block repeats the SW1–SW4 header; -2 disambiguates it in this JSON.
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reservedfactory default | ON | — | — | — |
| Reserved | OFF | — | — | — |
| Pulse Modefactory default | — | ON | — | — |
| Other Mode | — | OFF | — | — |
| 1 pulse / USD 1factory default | — | — | OFF | OFF |
| 2 pulses / USD 1 | — | — | OFF | ON |
| 4 pulses / USD 1 | — | — | ON | OFF |
| 20 pulses / USD 1 | — | — | ON | ON |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reservedfactory default | ON | — | — | — |
| Reserved | OFF | — | — | — |
| Pulse Mode | — | ON | — | — |
| Other Modefactory default | — | OFF | — | — |
| MDB | — | — | OFF | OFF |
| ICT104Ufactory default | — | — | OFF | ON |
| Reserved | — | — | ON | ON |
| Parallel A3 | — | — | ON | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reservedfactory default | ON | — | — | — |
| Reserved | OFF | — | — | — |
| Pulse Mode | — | ON | — | — |
| Other Modefactory default | — | OFF | — | — |
| MDBfactory default | — | — | OFF | OFF |
| ICT104U | — | — | OFF | ON |
| Reserved | — | — | ON | ON |
| Parallel A3 | — | — | ON | OFF |
| Function | SW1 | SW2 | SW3 | SW4 |
|---|---|---|---|---|
| Reservedfactory default | ON | — | — | — |
| Reserved | OFF | — | — | — |
| Pulse Mode | — | ON | — | — |
| Other Modefactory default | — | OFF | — | — |
| MDB | — | — | OFF | OFF |
| ICT104U | — | — | OFF | ON |
| Reserved | — | — | ON | ON |
| Parallel A3factory default | — | — | ON | OFF |
| Bill value | Pulse | MDB | ICT104U | Parallel A3 |
|---|---|---|---|---|
| BV1 | USD 1 | USD 1 | USD 1 | USD 1 |
| BV2 | USD 5 | USD 5 | USD 5 | USD 5 |
| BV3 | USD 10 | USD 10 | USD 10 | USD 10 |
| BV4 | USD 20 | USD 20 | USD 20 | USD 20 |
| BV5 | USD 50 | USD 50 | USD 50 | USD 50 |
| BV6 | USD 100 | USD 100 | USD 100 | USD 100 |
Before you power up
- After setting the dip switch of the credit pulses, you should reset the bill acceptor again.
- NORMAL: No sleep function.
- MODE 1: Bill-acceptor wakes up VMC with banknote only (special cable required).
- MODE 2: VMC wakes up bill-acceptor.
- MODE 1+2: Bill-acceptor wakes up with banknote or by VMC.
Not the sheet for your unit?
ICT ships the same model with different firmware and currency sets. Send us a photo of the label on the side of the acceptor and we will tell you exactly which settings apply.